Wybierz swój kraj/region
Obecny region:
Poland (PL)
Obecny region:
Poland (PL)
An estimated 2.6 billion people lack adequate access to safe drinking water.
The production of drinking water for small communities that do not wish to use chlorine gas, for rural areas or for water supply in emergency situations requires reliable equipment adapted to sometimes extreme conditions.
These facilities must meet current health standards and ensure stability of service to the population.
Installed directly on the water supply line, the Dosatron Chlorine Dosing Pump works with the water in your network as the only source of energy.
The dose of concentrated product is directly proportional to the volume of water flowing through the chemical dosing pump, regardless of variations in the flow rate and pressure of the water supply to the network.
Self-priming up to 4 meters, Dosatron Injection Pumps guarantee the coherence of the dilution. They allow direct reading and easy adjustment of the dosage value.
This historical concept developed in 1974 is now available for the first time with the Chlorine Dosing Pumps in the Water Line. Read more about the Dosing Pump Technology
The NSF or ACS mark on our Certified Chlorine Dosing Pumps is your assurance that the product has been tested by the most respected independent certification organizations in existence today.
Linia wodna Pompy dozujące do uzdatniania wody są oznaczone jako Solar Impulse.
Fundacja Solar Impulse pomaga decydentom korporacyjnym i rządom w osiąganiu celów środowiskowych i przyjmowaniu bardziej ambitnych polityk energetycznych. Etykieta Solar Impulse Efficient Solution Label jest jedną z pierwszych etykiet dla firm o pozytywnym wpływie, które łączą ochronę środowiska z rentownością finansową. Jego celem jest nagradzanie rozwiązań, które są zarówno zrównoważone środowiskowo, jak i finansowo.
In these two cases, our metering pump allows the water disinfection (bactericidal, virucidal, fungicidal) with residual protection against potential low levels of post-treatment contamination.
To make safe drinking water, the Dosatron ACS or NSF certified metering pumps, installed in line with the water pipe, inject a dose of chlorine (NaClo, CaClo) which allows the destruction of organic matter such as viruses and microbes contained in the water, in proportion to the flow rate.
Since a large part of the chlorine is needed to neutralize these organic materials, the dose of chlorine delivered by the metering pump will allow a part, called free residual chlorine, to remain available to treat possible future infection of the water in the network or in the homes.
This free chlorine allows for the persistence of the sanitizing capacity.
According to the WHO, in drinking water, the free chlorine concentration of the treated water should be 0.2 to 0.5 mg/l.
In this illustration, 100% of the water flow passes through the D3WL dosing pump.
The new smartphone application from Dosatron will allow you to perform all your chlorination calculations and share them with anyone you want.
